Electrical Insulation & Isolation

CHR® Tape Uses for Electrical Insulation and Isolation

Saint-Gobain Performance Plastics CHR® brand Electrical/Electronic tapes are manufactured from polyester films, fiberglass fabrics, papers and foils to provide an economical method to hold, insulate, isolate, mask, shield and protect coils, transformers, devices and a variety of electrical components in today's complex environments.

Using the correct tapes for their intended applications will provide the necessary balance of electrical and mechanical properties. This ultimately saves time, limits waste and enhances productivity.

Electrical tapes are typically used for major winding, layer and lead insulation, lead anchoring, coil covers, bundling, wrapping, banding, and isolation, EMI-RFI shielding and anti-static applications.

NEW Electrical Insulation & Isolation Tape Products -- CHR® CW01 Polyester Glass Filament Tape, and CHR® N203 Nomex Aramid Paper Tape (see table below for link to product data sheets)

Features and Benefits
Fire retardant	Meets MIL standards
UL recognized and/or listed	Manufactured in ISO certified facilities
Available with rubber, acrylic and silicone adhesives

CHR® Tape Products for Electrical Insulation and Isolation
M Series M54 M56 M64 M787	"M" for Mylar®, a Dupont trademark for polyester film. 1 and 2 mil film backed tapes with rubber adhesive capable and classified to 130°C. UL, MIL and CSA listed. Available in clear and yellow.
M Series M60 M97 M99 M705 M706 M765	1 and 2 mil film backed tapes with acrylic adhesive capable and classified to 130°C. UL, MIL and CSA listed. Available in a clear, yellow, black, white, printable and flame retardant.
M Series M50 M52 M66	1 mil film backed tapes with silicone adhesive capable and classified to 130°C. UL, MIL and CSA listed. Available in a clear, white, green and flame retardant.
K Series K102 K103 K109	"K" for Kapton®, a Dupont trademark for polyimide film. 1 and 2 mil film backed tapes with acrylic adhesive capable and classified to 155°C. UL, MIL and CSA listed. Available flame retardant.
K Series K100 K104 K250 K350	1, 2 and 5 mil film backed tapes with silicone adhesive capable and classified to 180°C. UL, MIL and CSA listed. Available flame retardant.
K Series 2345-1 2345-2 2345-5	1, 2 and 5 mil generic film backed tapes with silicone adhesive capable and classified to 180°C. UL, MIL and CSA listed. Available flame retardant.
G Series G551 G561 G565 G569	"G" for fiberglass fabric. All G Series tapes are produced from 4.5 mil electrical grade fiberglass fabric with rubber (G551), acrylic (G569) and silicone (G561, G565) adhesive and capable of 130°C, 155°C and 180°C UL listed classification. Also, CSA and MIL certified.
FEP Film C 2355-2	FEP "fluorinated ethylene-propylene" film. 2 mil backed FEP film tapes are especially suited for high temperature applications such as coils and capacitors.
PTFE Film HM350 2255-2	PTFE "polytetrafluoroethylene" film. 1.5 and 2 mil PTFE film backed tapes are unaffected by chemicals and capable to over 260°C.
Polyester Film CW01	Polyester glass filament film. 1 mil polyester film/glass filament film coated acrylic adhesive with excellent heat resistance up to 155°C and superior tensile strength and adhesion with a high dielectric breakdown voltage.
A and C Series A662 C661 C665	"A" for Aluminum, "C" for Copper foil. 3 and 1.5 mil foils with acrylic adhesives capable to 155°C and UL listed. Excellent for EMI-RFI shielding applications.
Paper N203	Nomex aramid paper. 2 mil thick backing material with 1.6 mils of flame retardant acrylic pressure sensitive adhesive. Resistant to acids, alkalis, refrigerants, and various wire enamels and varnishes.